Product selector

Topseller

Panel-mounted thermostat

EM series to 500 °C Basic type: 602021

The devices of the EM series are available as temperature controllers (TR), temperature monitors (TW), temperature limiters (TB), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB places the system being monitored in a safe operating status.

Material: stainless steel/copper
Max. capillary: 5000 mm
Control range: up to 300 °C

Topseller

JUMO safetyM STB/STW

Safety temperature limiter, safety temperature monitor according to DIN EN 14597 Basic type: 701150

The device is primarily built to monitor thermotechnical processes accurately and switch the systems to a safe operating status in the event of malfunctions. As a result, risks to people, the environment, production facilities, and production goods can be identified and averted at an early stage.

AC 110 to 240 V; +10/-15 %; ACDC 20 to 30 V
2 relay outputs
1oo2D architecture

Topseller

JUMO tecLine CR

Conductive two-electrode conductivity sensor Basic type: 202924

These sensors are used in conjunction with conductivity transmitters to define the electrolytic conductivity in liquids. The materials in the sensors are physiologically harmless and meet FDA requirements.

Measuring range: 0.05 µS/cm to 1 mS/cm
Process pressure up to 16 bar
Cell constant K = 0.01 or 0.1

Topseller

JUMO dTRANS T06

Multifunctional four-wire transmitter in mounting rail case Basic type: 707071

The transmitter acquires the temperature through an RTD temperature probe or a thermocouple (double thermocouple). The transmitter can also acquire standard signals. Connection takes place through an RTD temperature probe with two-wire, three-wire, or four-wire connection.

1 universal measurement input
RS485 interface Modbus-RTU
SIL 2/SIL 3 according to DIN EN 61508

Topseller

JUMO dTRANS T05

Programmable transmitter in two-wire technology Basic type: 707050

The transmitters acquire sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers in two-wire, three-wire, or four-wire circuits.

Output signal 4 to 20 mA/0 to 10 V
Temp in °C or °F
Voltage signals -100-+1100 mV

Topseller

JUMO diraTRON

Compact controller Basic type: 702110

Universally-applicable devices in 5 DIN formats for controlling process variables. The basic type includes autotuning, a ramp function, a program controller, manual mode, limit value monitoring functions, digital control signals, extensive timer functions, and a service counter.

1 control channel
Display of individual texts
Service counter

Topseller

JUMO CTI-500

Inductive conductivity transmitter with switching contacts Basic type: 202755

The device is used for measuring and controlling the conductivity or the concentration of liquid media. The integrated temperature measurement enables precise and quick compensation. Additional functions allow the combined toggling of measuring range and temperature coefficient.

For inductive conductivity sensors
Separate or compact design type
With salt dilution control

Topseller

JUMO tecLine CR-GT

Conductive two-electrode conductivity sensor Basic type: 202925

These sensors are used in conjunction with conductivity transmitters to define the electrolytic conductivity in liquids. They are especially suitable for media separation, drinking water preparation, and for inspecting as well treating wastewater and service water.

Measuring range: 10 µS/cm to 15 mS/cm
Process pressure up to 16 bar
Cell constant K = 1.0

Topseller

JUMO ecoLine/JUMO BlackLine pH

pH combination electrode with glass or plastic shaft Basic type: 201005

The electrode acquires the pH value of water and aqueous-based media. It is used, among other places, in swimming pools, aquaristics for monitoring and treating drinking water, and in greenhouse technology.

Measuring range: pH 0 to 12
Temperature: 0 to 60 °C
Insertion length: 120 mm

Topseller

JUMO tecLine HD

pH combination electrodes Basic type: 201021

The product acquires the pH value of water and aqueous-based media. It has robust industrial electrodes for the most demanding applications with increased dirt and poison load as well as oil-containing media.

Measuring range: pH 0 to 14
Temperature: 0 to 135 °C
Process pressures up to 13 bar

Topseller

Surface-mounted single thermostats

ATH series Basic type: 603021

The devices of the ATH series are available as temperature controllers (TR), temperature limiters (TB), temperature monitors (TW), safety temperature monitors (STW), and safety temperature limiters (STB). In the event of a malfunction the STB sets the system being monitored to a safe operating status.

Material: stainless steel/copper
Max. capillary: 5000 mm
Max. control range: 20 to 500 °C

Topseller

JUMO heatTHERM-AT and DR

Surface-mounted thermostat Basic type: 603070

The JUMO heatTHERM-DR (design type 7+8) type is a specific variation with a special case bottom section for DIN rail or wall mounting. As a result, easy installation on mounting rails TH35 according to DIN EN 60715 (e.g. in control cabinets) is possible.

"Push-In®" terminal technology
Surface-mounted thermostat or DIN-rail thermostat
Max. control range up to 350 °C

Topseller

Hygro transducer, hygrothermal transducer, and CO2 measuring probe

For facility management and climate monitoring Basic type: 907021

This measuring probe is mainly used in heating engineering, air-conditioning, and ventilation technology. It sets itself apart in particular through high measuring accuracy, long-term stability, and chemical resistance.

Measuring range: 0 to 100 % RH
Medium: air, pressureless
CO2 measuring range: 0 to 10000 ppm

Topseller

JUMO Cloud

IoT platform for secure process management Basic type: 701810

The IoT platform for process visualization, data acquisition, evaluation, and archiving enables worldwide access to measurement data via common web browsers. The JUMO Cloud is characterized by high security as well as valuable visualization, alarm, and planning functions.

End-to-end encryption
Process visualization
Unlimited access

Topseller

JUMO smartWARE SCADA

Software for process monitoring and control Basic type: 701820

The SCADA software provides convenient access to measurement data via common web browsers and offers functions for process visualization as well as evaluation and archiving of the acquired data. JUMO smartWARE SCADA also supports manufacturing and work processes with valuable monitoring, alarm, and planning functions.

Across networks
Process visualization
Unlimited access

Topseller

JUMO variTRON 500

Central processing unit for an automation system Basic type: 705002

JUMO variTRON 500 is based on the modular platform JUMO JUPITER. The central processing unit along with the tried-and-tested input and output modules (incl. controller module) of the measuring, control, and automation system JUMO mTRON T form an overall system and provide a PLC (CODESYS V3.5).

State-of-the-art interfaces such as OPC UA, MQTT
PROFINET IO, EtherCAT, Modbus-TCP/RTU
800 MHz quad-core processor

Topseller

JUMO mTRON T

Central processing unit Basic type: 705001

The central processing unit contains the process map of the application and manages the configuration and parameter data of the overall system. 9 program generators and extensive limit value monitoring functions are available for individual control tasks.

9 program generators
OPC server (CODESYS V3.5)
PLC according to IEC 61131-3

Topseller

Combination fitting

For membrane-covered sensors Basic type: 202811

The product is designed for mounting several electrochemical sensors. It is typically used for monitoring the disinfection of drinking and swimming pool water as well as slightly polluted process and cooling water.

For electrochemical sensors
Incl. flow monitor
Temperature 0 to 60 °C and 0 to 90 °C

Topseller

JUMO DICON touch

Two-Channel/Four-Channel Process and Program Controller Basic type: 703571

DICON touch can be used to perform complex control and management tasks. The plant can be visualized and operated via freely-definable process screens. The device has a modular design and can therefore be adapted to the individual plant.

Cascade control
Modbus master TCP/RTU
Up to 4 analog inputs

Topseller

Screw-in RTD temperature probe

With terminal head form B Basic type: 902020

Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.

Temp.: -50 to +600 °C
Terminal heads BUZ/BUZH/BBK
Temperature sensor Pt100/Pt500/Pt1000

Topseller

JUMO MIDAS S06

OEM pressure transmitter for low pressure applications Basic type: 401011

This pressure transmitter is completely welded and designed for use in harsh conditions. It can also be used for level measurement. The applied silicon sensor is extremely resilient.

Measuring range: 0 to 400 mbar relative
Compact design type
DIN EN 61373 category 1B + DIN EN 50155

Topseller

Screw-in thermocouples

With terminal head form B Basic type: 901020

Screw-in thermocouples are primarily used for measuring temperatures in liquids and gases. Their installation type enables the formation of reliable seals, both for vacuum and overpressure applications.

Temp.: -200 to +800 °C
Insertion length 160 to 600 mm
Thermocouples type J, K, and L

Topseller

JUMO TAROS S47 P

Precision pressure transmitter Basic type: 402072

The pressure transmitter is used to measure relative and absolute pressures in liquid and gaseous media. It offers high process reliability through maximum accuracy as well as over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. or 0.6 and 40 bar abs. The precision transmitter is used, among other things, in mechanical and plant engineering.

0.1 to 100 bar rel; 0.6 to 40 bar abs
Temperature: -40 to + 125 °C
Protection type IP65 to IP69

Topseller

JUMO TAROS S46 H

Hygienic pressure transmitter Basic type: 402071

The device is designed according to the hygienic requirements for precision measurement and a long lifecycle. It offers process reliability through a high degree of accuracy, even over a wide temperature range. The measuring ranges are between 0.1 and 100 bar rel. pressure or between 0.25 and 40 bar abs. pressure. The transmitter is used is the food and pharmaceutical industry.

0.1 to 100 bar rel; 0.25 to 40 bar abs
Temperature: -40 to + 125 °C
FDA compliant materials

Topseller

JUMO MIDAS S05

OEM pressure transmitter for universal applications Basic type: 401010

This pressure transmitter acquires the relative and absolute pressure. The measuring system is fully welded and can be used for all media. The silicon sensor is resistant to overloading even in the lowest measuring ranges. It is mainly used in mechanical and plant engineering and is also suitable for hydrogen applications in electrolyzers, synthesis plants, and mobile fuel cells.

Measuring range: 0 to 100 bar relative, 0 to 40 bar absolute
Compact design type
Piezoresistive silicon sensor

Topseller

JUMO digiLine pH/ORP/T

Digital or analog interface for pH/ORP/T Basic type: 202705

This transmitter permits transmission of the measured value from the sensor to the measuring or automation device via digital bus communication or as an analog signal. The digital device version of the transmitter has a 5-pole M12 plug connection – the analog version an 8-pole one.

For pH, redox, and temperature
M12 plug connection
Analog or digital output

Topseller

JUMO AQUIS touch P

Modular multichannel measuring device (liquid analysis) Basic type: 202580

The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.

Panel built-in device
2 analysis sensors and 15 measuring signals
P, PI, PD, and PID behavior

Topseller

JUMO AQUIS touch S

Modular multichannel measuring device (liquid analysis) Basic type: 202581

The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.

Wall-surface-mounted housing
4 analysis sensors and 21 measuring signals
P, PI, PD, and PID behavior

Topseller

JUMO tecLine HD

Redox combination electrodes Basic type: 201026

The electrode acquires the redox potential of water and aqueous-based media. A robust industrial electrode for the most demanding applications with increased dirt and poison load as well as oil-containing media.

Measuring range: ± 1500 mV
Temperature: 0 to 135 °C
Process pressure up to 13 bar

Topseller

JUMO CTI-750

Inductive conductivity transmitter with switching contacts Basic type: 202756

The device is used for measuring and controlling the conductivity or the concentration of liquid media. The integrated temperature measurement enables precise and quick temperature compensation. Additional functions allow for optimum use in CIP processes.

For inductive conductivity sensors
Separate or compact design type
For CIP cleaning

Topseller

JUMO diraVIEW 104/108/116/132

Digital indicator Basic type: 701510

Devices that can be used universally in various DIN formats to display process variables. The basic version includes a min/max value function, a hold function, a taring function, limit value monitoring functions, digital control signals, timer functions, and a service counter.

1 universal analog input
Galvanic isolation 3000 V
5 DIN formats (size)

Topseller

JUMO eTRON T100

Electronic thermostat with optional PID two-state controller function Basic type: 701052

The electronic thermostat for DIN rail mounting has been especially developed for temperature control and monitoring. RTD temperature probes, thermocouples, current signals, and special temperature probes that are used in railroad technology can be connected to the measurement input. The intuitively operated device is optionally available as a PID two-state controller.

Relay (changeover contact 10 A), PhotoMOS® relay
Pt100, Pt1000, KTY2X-6
Thermocouple type J, L, and K

Topseller

JUMO flowTRANS US W01

Ultrasonic flowmeter for liquids Basic type: 406050

The flowmeter measures precisely in conductive and non-conductive media. Ultrasonic technology allows it to be absolutely free of wear and maintenance. Its metal-free housing and the plastic pipe in various nominal widths allow it to be used in a flexible manner – even when dealing with corrosive media.

Nominal widths DN 15 to DN 32
Nominal pressure up to PN 16
Medium temperature up to 80 °C

Topseller

Screw-in RTD temperature probe

With terminal head form J Basic type: 902030

Screw-in RTD temperature probes are predominantly used for measuring temperatures in liquids and gases. The installation type enables the formation of reliable seals for both vacuum and overpressure applications.

Temp.: -50 to +400 °C
Reliable seal in the event of vacuum and overpressure
Temperature sensor Pt100

New product

JUMO multirange and differential pressure transmitter

For non-aggressive gases Basic type: 402006

The product enables differential pressure measurement in non-aggressive gases. Permanent overpressure protects the process from dust penetration. The transmitter is mainly used in cleanrooms.

Measuring range: 2.5 hPa to 100 hPa DP
Zero point adjustment possible
0(2) to 10 V or 0(4) to 20 mA

New product

JUMO hydroTRANS S30

Humidity and temperature transmitter with optional CO2 module in duct version Basic type: 907043

This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The duct design is suitable for use in ventilation ducts and lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.

Medium: Air, pressureless (non-aggres.)
Duct version (IP65)
Temperature range: -40 to +80 °C

New product

JUMO hydroTRANS S40

Humidity and temperature transmitter with optional CO2 module in rod version Basic type: 907044

This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The rod version is suitable for use in hard-to-reach areas and ventilation lines. The humidity measuring device is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology.

Medium: air, pressureless (non-aggres.)
Rod version (IP65)
Temperature range: -40 to +80 °C

New product

JUMO hydroTRANS S10

Humidity and temperature transmitter with optional CO2 module in indoor version Basic type: 907045

This humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The room version is suitable for indoor use (e.g. offices, residential premises, etc.). The humidity measuring device is available with various interfaces. It is characterized by ease of installation and reliable sensor technology.

Medium: air, pressureless (non-aggres.)
Indoor version (IP20)
Temperature range: -5 to 55 °C

New product

JUMO hydroTRANS S20

Humidity and temperature transmitter with optional CO2 module in wall-mounted version Basic type: 907042

The humidity and temperature transmitter with optional CO2 module works with the capacitive measurement method. The wall-mounted version is suitable for use in harsh environments such as storage rooms and production facilities. The humidity sensor is available with various interfaces. It is characterized by ease of installation, robustness, and reliable sensor technology. Innovative Single Pair Ethernet technology enables a direct connection to the JUMO Cloud and other automation systems.

Medium: air, pressureless (non-aggres.)
Wall-mounted version (IP65)
Temperature range: -40 to 80 °C

New product

JUMO dTRANS T06 Junior

Multifunctional four-wire transmitter in mounting rail case Basic type: 707070

The JUMO dTRANS T06 Junior multifunction four-wire transmitter is the solution for a wide range of applications in plant engineering due to its galvanic isolation and customer-specific linearization. This entry-level model has a width of only 17.5 mm so that it takes up little space in a control cabinet.

1 universal input
Small size 17.5 mm
High level of galvanic isolation

New product

JUMO NESOS R04 LS

Float switch in curved version Basic type: 408304

The float switch is typically used to switch alarms, pumps, signal lamps, valves, and horns via a contact protection relay. When connected to intrinsically safe electrical circuits, the intrinsically safe [Ex i] version of the product meets the requirements.

Guide tube length up to 2000 mm
Medium temperature: -52 to 240 °C
Optional temperature sensor/switch

New product

JUMO NESOS R40 LSH

Float switch in horizontal design Basic type: 408340

The horizontal float switch can be easily mounted, e.g. on the side of a tank wall. Due to its construction it is suitable for the minimum and maximum limit level of liquids (MIN/MAX level). It offers up to 2 switching contacts for redundant level measurement. Thanks to Ex approvals, it is ideal for the chemical industry, power plants, machine and container construction.

Guide tube length up to 1000 mm
Medium temperature: -52 to 240 °C
Optional temperature sensor/switch

New product

JUMO railTEMP

Wheelset temperature probe Basic type: 902195

JUMO railTEMP has a qualified measuring insert especially developed for railway applications with up to 2 sensing elements and can be equipped with different sensors. The firmly attached connection line is available with a variety of different connections or high-quality connectors. Halogen-free materials and cable protection ensure maximum safety in rail transport as well as reliable measurement results.

Temp.: -50 to +200 °C
Protection type: IP68 / IP69
Certified acc. to DIN EN 50155/61373

New product

JUMO IPC 300

Electronic transformer Basic type: 709051

The JUMO IPC 300 is an electronic transformer for controlling heating loads. Due to the amplitude control, the mains current is proportional to the required performance. This reduces interference (flicker, harmonics) and energy costs while increasing the durability of MoSi2 and SiC heating elements, which in turn reduces operating costs.

Power up to 40 kW
Amplitude control
Protection of MoSi2 and SiC heating elements

New product

JUMO SIRAS P21 DP

Process pressure transmitter with SIL/PL Basic type: 403024

The pressure transmitter reliably and accurately measures differential pressure of liquids, steam, and gases. It was developed for use in safety-related plants with Safety Integrity Level (SIL) according to DIN EN 61508. As a result, the transmitter is perfectly suited for safety measuring chains in the process industry and mechanical engineering.

Up to 100 bar
Linearity: 0.05 %
Safety Integrity Level (SIL 2/SIL 3), PL c/PL d

New product

JUMO ZELOS C01 LS

Capacitive level switch Basic type: 408401

The capacitive level switch identifies the level of liquids and solids. It can also be used in pressurized tanks or pipes. Typically, the level switch is used in industrial environments for applications with requirements for overflow and dry-run protection or for media detection (such as sludge in separation processes).

From liquids to bulk materials
Medium temperature: -40 to +200 °C
Automatic media detection

New product

JUMO MIDAS C12 CA

Pressure transmitter − Compressed Air Basic type: 401014

The JUMO MIDAS C12 CA is designed as a pressure transmitter especially for requirements in the field of compressor pressure measurement. The ceramic sensor detects relative pressures which provides a reliable and long-term stable signal.

long-term stability
precision
optimized cost

New product

Intrinsically safe industrial measuring probe

For humidity, temperature, and derived variables Basic type: 907037

This measuring probe has been designed for accurate and risk-free humidity monitoring in potentially explosive areas. It is mainly used in challenging industrial applications and under harsh conditions.

Measuring range: 0 to 100 % RH
ATEX approval up to zone 0
Pressure resistant up to 100 bar

New product

JUMO MIDAS S22 Ex

Miniature pressure transmitter for Ex areas Basic type: 404720

The miniature pressure transmitter measures the relative and absolute pressure of gases, steam, and liquids based on the piezoresistive measuring principle. It is completely welded and is particularly suitable for use in explosion-proof areas. Including oil, fuel, or gas plants.

2.5 to 100 bar relative and absolute
Medium temperature: -20 to +85 °C
Accuracy: as of 0.3 % MSP

New product

JUMO miroVIEW

Smart digital indicator with limit value monitoring function for panel mounting Basic type: 701590

The JUMO miroVIEW is a digital indicator with measurement input for RTD temperature probes for panel mounting. In the 60 mm and 80 mm round installation format, the JUMO miroVIEW offers an alternative solution for mechanical dial thermometers or contact dial thermometers.

Measuring inputs for RTD temperature probes
Round installation formats
Quick configuration via USB

Find the perfect product for your application

Product selector

We are at your service